document number: 23103 for technical questions, contact: ceramitesupport@vishay.com www.vishay.com revision: 04-jun-09 1 ac line rated disc capacitors class x1, 400 vac/class y2, 300 vac 30lv series vishay cera-mite lo? = 0.132" (3.4 mm) typ. insulation resistance min. 1000 f tolerance on capacitance 10 %; 20 % dissipation factor 2.0 % max. at 1 khz; 1 v ceramic dielectric c0g, u2j, p3k, r3l (class 1) x7r, y5u (class 2) category temperature range - 25 c to + 125 c climatic category acc. to en60068-1 25/125/21 operating temperature range - 30 c to + 125 c features ? worldwide safety agency recognition underwriters laboratories - ul1414 and ul1283 canadian standards association - csa 22.2 european en132400 to iec 60384-14 second edition ? complete range of capacitance values ? radial leads ? compliant to rohs directive 2002/95/ec applications ? required in ac power supply and filter applications ? specific industry requirements design the capacitors consist of a cera mic disc of which both sides are silver-plated. connection leads are made of tinned copper having a diameter of 0.032" (0.81 mm) or 0.025" (0.64 mm). the capacitors may be supplied with radial kinked or straight leads having a lead spacing of 0.375" (9.5 mm) or 0.250" (6.4 mm ). the standard tolerance is 20 %. coating is made of flame retardant epoxy resin in accordance with ?ul 94 v-0.? capacitance range 10 pf to 0.015 f rated voltage iec 60384-14.2: (y2): 300 vac, 50 hz iec 60384-14.2: (x1): 400 vac, 50 hz ul 1414: 250 vac, 60 hz ul 1283: 250 vac, 60 hz csa 22.2 no.1: 250 vac, 60 hz csa 22.2 no.8: 400 vac, 60 hz dielectric strengt h between leads component test: 2500 vac, 50 hz, 2 s as repeated test admissible only once with: 2250 vac, 50 hz, 2 s random sampling test (destructive test): 2500 vac, 50 hz, 60 s dielectric stren gth of body insulation 2300 vac, 50 hz, 60 s (destructive test) 0.125" max. (3.2 mm) tinned copper leads 1.250" min. (32 mm) t max. ls lo d max. ?
30lv series vishay cera-mite ac line rated disc capacitors class x1, 400 vac/class y2, 300 vac www.vishay.com for technical questions, contact: ceramitesupport@vishay.com document number: 23103 2 revision: 04-jun-09 notes 1. alternate lead spacings of 7.5 mm and 10 mm are available bulk or tape and reel on request. 2. european required minimum lead clearance (pre vents use of inside crimp) 0.118" (3 mm) 3. type 30 lvs15 not available with ul 1414 recognition. tape and reel options ? to specify tape and reel, add two letter suffix to the orderi ng code (for details of the pack aging code see general section o f the catalog) optional 3-leaded style an optional 3-leaded construction is available. it consists of a single capacitor with the two outside leads attached to one electrode, and the center lead at tached to the electrode. used in feed-thru or line-to-ground app lications, it allows a short g round lead for enhanced high frequency performance. ordering information, ce ramic x1/y2 capacitors 30lv c (pf) tol. (%) d diameter inch (mm) t thickness inch (mm) wire size ls lead space inch (mm) ordering code awg inch (mm) c0g 10 10 % 0.330 (8.4) 0.185 (4.7) 22 0.025 (0.64) 0.250 (6.4) 30lvq10-r u2j 15 10 % 0.330 (8.4) 0.200 (5.1) 22 0.025 (0.64) 0.250 (6.4) 30lvq15-r p3k 22 10 % 0.330 (8.4) 0.180 (4.6) 22 0.025 (0.64) 0.250 (6.4) 30lvq22-r r3l 33 10 % 0.330 (8.4) 0.190 (4.8) 22 0.025 (0.64) 0.250 (6.4) 30lvq33-r 47 10 % 0.330 (8.4) 0.170 (4.3) 22 0.025 (0.64) 0.250 (6.4) 30lvq47-r s3l 68 10 % 0.330 (8.4) 0.175 (4.4) 22 0.025 (0.64) 0.250 (6.4) 30lvq68-r x7r 100 10 % 0.330 (8.4) 0.180 (4.6) 22 0.025 (0.64) 0.250 (6.4) 30lvt10-r 150 0.330 (8.4) 0.180 (4.6) 30lvt15-r 220 0.330 (8.4) 0.195 (5.0) 30lvt22-r 330 0.330 (8.4) 0.195 (5.0) 30lvt33-r 470 0.330 (8.4) 0.180 (4.6) 30lvt47-r 560 0.330 (8.4) 0.200 (5.1) 30lvt56-r 680 0.330 (8.4) 0.180 (4.6) 30lvtt68-r 1000 0.365 (9.3) 0.185 (4.7) 30lvtd10-r 1500 0.460 (11.7) 0.180 (4.6) 30lvtd15-r y5u 680 20 % 0.330 (8.4) 0.220 (5.6) 22 0.025 (0.64) 0.250 (6.4) 30lvt68-r 1000 0.330 (8.4) 0.215 (5.5) 30lvd10-r 1500 0.330 (8.4) 0.195 (5.0) 30lvd15-r 2000 0.400 (10.2) 0.210 (5.3) 30lvd20-r 2200 0.400 (10.2) 0.200 (5.1) 30lvd22-r 2700 0.430 (10.9) 0.200 (5.1) 30lvd27-r 2800 0.430 (10.9) 0.200 (5.1) 30lvd28-r 3000 0.460 (11.7) 0.205 (5.2) 30lvd30-r 3200 0.460 (11.7) 0.200 (5.1) 30lvd32-r 3300 0.460 (11.7) 0.195 (5.0) 30lvd33-r 3900 0.490 (12.4) 0.200 (5.1) 30lvd39-r 4000 0.530 (13.5) 0.210 (5.3) 30lvd40-r 4700 0.620 (15.7) 0.220 (5.6) 20 0.032 (0.81) 0.375 (9.5) 30lvd47-r 5000 0.620 (15.7) 0.215 (5.5) 30lvd50-r 5500 0.560 (14.2) 0.195 (5.0) 30lvd55-r 5600 0.560 (14.2) 0.195 (5.0) 30lvd56-r 6800 0.680 (17.3) 0.205 (5.2) 30lvd68-r 8000 0.680 (17.3) 0.195 (5.0) 30lvd80-r 9000 0.720 (18.3) 0.200 (5.1) 30lvd90-r 0.010 f 0.790 (20.1) 0.190 (4.8) 30lvs10-r 0.015 f 0.900 (22.9) 0.200 (5.1) 30lvs15-r 1.250" min. (32 mm) 4 mm max. d max. t ls b a g a g b c
document number: 23103 for technical questions, contact: ceramitesupport@vishay.com www.vishay.com revision: 04-jun-09 3 30lv series ac line rated disc capacitors class x1, 400 vac/class y2, 300 vac vishay cera-mite leakage current vs. voltage (typical) insertion loss vs. frequency (typical) 0 10 20 30 40 50 60 70 8 0 90 100 0 500 1000 1500 2000 2500 ac voltage (v) rms leakage current (ma) rms 30l v q10-r 30l v q6 8 -r 30l v q47-r 30l v q33-r 30l v q22-r 30l v q15-r 0 0.5 1 1.5 2 0 500 1000 1500 2000 2500 ac voltage (v) rms leakage current (ma) rms 30l v t33-r 30l v t15-r 30l v td10-r 30l v tt6 8 -r 30l v t56-r 30l v t47-r 30l v t10-r 30l v t15-r 30l v t22-r 0 0.5 1 1.5 2 0 500 1000 1500 2000 2500 ac voltage (v) rms leakage current (ma) rms 30l v d33-r 30l v t6 8 -r 30l v d10-r 30l v d15-r 30l v d20-r 30l v d22-r 30l v d27-r 30l v d2 8 -r 30l v d30-r 30l v d32-r 0 2 4 6 8 10 0 500 1000 1500 2000 2500 ac voltage (v) rms leakage current (ma) rms 30l v d55- r 30l v t56-r 30l v d6 8 -r 30l v d 8 0-r 30l v d90- r 30l v s10-r 30l v d50- r 30l v d47- r 30l v ds15- r frequency (mhz) insertion loss (db) 10 100 1000 100 30l v q6 8 -r 30l v q47-r 30l v q33-r 30l v q10-r 30l v q15-r 30l v q22-r 10 20 30 40 50 1 frequency (mhz) insertion loss (db) 10 100 1000 100 30l v td15-r 30l v td10-r 30l v tt6 8 -r 30l v t56-r 30l v t10-r 30l v t15-r 30l v t22-r 30l v t33-r 30l v t47-r 10 20 30 40 50 1 frequency (mhz) insertion loss (db) 1 10 100 10 20 30 40 50 100 30l v d33-r 30l v d32-r 30l v d30-r 30l v d2 8 -r 30l v d27-r 30l v t6 8 -r 30l v d10-r 30l v d15-r 30l v d20-r 30l v d22-r fre q uenc y ( mhz ) insertion loss (db) 0.1 1 100 10 20 30 40 50 100 30l v s15-r 30l v s10-r 30l v d90-r 30l v d 8 0-r 30l v d6 8 -r 30l v d39-r 30l v d40-r 30l v d47-r 30l v d50-r 30l v d55-r 30l v d56-r 10
30lv series vishay cera-mite ac line rated disc capacitors class x1, 400 vac/class y2, 300 vac www.vishay.com for technical questions, contact: ceramitesupport@vishay.com document number: 23103 4 revision: 04-jun-09 note 1 ul1414 across-the-line, antenna coup ling, and line-by-pass capacitors: ? across-the-line - a c apacitor connected either across a supply circuit or between one si de of a supply circuit and a conductiv e part that may be connected to earth ground. ? antenna-coupling - a capacitor con nected from an antenna terminal to circuits within an appliance. ? line-by-pass - a capacitor connect ed between one side of a supply circui t and an accessible conductive part note 2 iec 60384-14 subclass y capacitors: ? a capacitor of a type suitable for use in situations where fa ilure of the capacitor could le ad to danger of electric shock. ? class y capacitors are divided into sub- classes based on type of in sulation bridged and voltage ranges. ? for definitions of basic, supplem entary, double and reinforced insu lation, see iec publication 536. ? subclass y capacitors may be used in applicat ions which require a subclass x rating. note 3 iec 60384-14 subclass x capacitors: ? a capacitor of a type suitable for use in situations where failure of the capacitor in situations where failure of the capacit or would not lead to danger of electric shock. ? class x capacitors are divided into subclasses according to the peak im pulse test voltage superimposed on the main voltage approvals iec 60384 - 14/2 nd issue (1993) incl. am.1 (1995) - safety tests en132400 (1994) - safety tests that approval to g ether with cb test certificate substitutes the national approval of the followin g nations: belgium france italy austria china japan spain denmark greece luxembourg portugal singapore poland united kingdom germany ireland netherlands sweden slovenia hungaria czech republic finland iceland norway switzerland korea israel y2 capacitor: cb-test certificate: de 1-19455 10 pf... 0.015 f 300 v ac x1 capacitor: cb-test certificate: de 1-19455 10 pf... 0.015 f 400 v ac underwriters laboratories inc. ul 1414 across-the-line, antenna-coupling a nd line-by-pass component 10 pf... 0.010 f agency file/license e99264 v2s2 250 v ac ul 1283 emi filters 10 pf... 0.015 f agency file/license e99264 v2s2 250 v ac canadian standards association csa c22.2 across-the-line, isolation capacitor 10 pf... 0.015 f no. 1 agency file/license lr 62016-12 250 v ac no. 8 line-to-ground capacitor 10 pf... 0.015 f agency file/license lr 62016-12 400 v ac marking 100k 30lv y2 300 ~ x1 400 ~ cm 125 c sample
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
